Sony BDV-E770W Operating Instructions - Page 39

External Audio Device Using an S-AIR Product About S-AIR products There are two types of S-AIR product. • S-AIR main unit (this unit): This is for transmitting sound. You can use up to three S-AIR main units. (The number of usable S-AIR main units depends on the use environment.) • S-AIR sub unit: This is for receiving sound. - Surround amplifier (supplied): You can enjoy surround speaker sound wirelessly. - S-AIR receiver (optional): You can enjoy system sound in another room. Room A S-AIR main unit To set the ID of the unit 1 Set the S-AIR ID switch of the unit to the desired ID. S-AIR ID ABC S-AIR ID switch You can select any ID (A, B, or C). 2 Press "/1. The system turns on. 3 Set the S-AIR sub unit to the same ID. Wireless transmission is activated as follows (example): ID A External Audio Device S-AIR sub unit (surround amplifier) Room B S-AIR sub unit (S-AIR receiver) (not supplied) Setting the S-AIR ID to activate wireless transmission For the surround amplifier For the S-AIR receiver Simply by matching the ID of the unit and the S-AIR sub unit, you can activate wireless transmission. ID A ID A To set the ID of the surround amplifier 1 Make sure that the SURROUND SELECTOR switch of the surround amplifier is set to SURROUND. 2 Set the S-AIR ID switch of the surround amplifier to match the ID (A, B, or C) of the unit. 3 Press "/1 on the surround amplifier. When wireless transmission is activated, the S-AIR/STANDBY indicator of the surround amplifier turns green. For details of the S-AIR/STANDBY indicator, see "Surround amplifier" (page 11). To set the ID of the S-AIR receiver Refer to the operating instructions of the S-AIR receiver. 39US