Sony BDV-E770W Operating Instructions - Page 59

Additional Information Symptom Problems and solutions Video signals are only output • Set [Output Video Format] in [Screen Settings] to [Component Video] from the HDMI OUT jack when (page 51). connecting the HDMI OUT jack and other video output jacks at the same time. The dark area of the picture is too • Set [Picture Quality Mode] to [Standard] (default) (page 32). dark/the bright area is too bright or unnatural. The picture is not output correctly. • Check the [Output Video Format] settings in [Screen Settings] (page 51). • If the analog and digital signals are output at the same time, set [BD/DVD- ROM 1080/24p Output] in [Screen Settings] to [Off] (page 51). • For BD-ROMs, check the [BD/DVD-ROM 1080/24p Output] settings in [Screen Settings] (page 51). Picture noise appears. • The disc is dirty or flawed. • If the picture output from your system goes through your VCR to get to your TV, the copy-protection signal applied to some BD/DVD programs could affect picture quality. If you still experience problems even when you connect your unit directly to your TV, try connecting your unit to the other input jacks. Even though you set the aspect • The aspect ratio on the disc is fixed. ratio in [TV Type] of [Screen Settings], the picture does not fill the TV screen. Color irregularity occurs on the TV screen. • If the speakers are used with a CRT-based TV or projector, install the speakers at least 1.0 ft (0.3 meters) from the TV set. • If the color irregularity persists, turn off the TV set once, then turn it on after 15 to 30 minutes. • Make sure that no magnetic object (magnetic latch on a TV stand, health care device, toy, etc.) is placed near the speakers. Sound Symptom There is no sound. No sound is output from the HDMI OUT jack. The left and right sounds are unbalanced or reversed. There is no sound from the subwoofer. Problems and solutions • The speaker cord is not connected securely. • Check the speaker settings (page 46). • Fast forward or fast reverse is performed. Press N to return to normal play mode. • Slow forward or freeze frame is performed. Press N to return to normal play mode. • Set [Audio Output] to [HDMI] (page 52). • Check that the speakers and components are connected correctly and securely. • Check the speaker connections and settings (pages 17, 46). 59US