Sony BDV-E770W Operating Instructions - Page 58

Troubleshooting, Power, General, Picture

Get Sony BDV-E770W - Blu-ray Disc™ Player Home Theater System PDF manuals and user guides
UPC - 027242780743
View all Sony BDV-E770W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

Troubleshooting If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained. In the event of a problem with the S-AIR function, have a Sony dealer check the entire system together (S-AIR main unit and sub unit). Power Symptom The power is not turned on. "PROTECTOR" and "PUSH POWER" appear alternately in the front panel display. Problems and solutions • Check that the AC power cord (mains lead) is connected securely. Press "/1 to turn off the system, and check the following items after "STANDBY" disappears. • Are the + and - speaker cords short-circuited? • Are you using only the specified speakers? • Is anything blocking the ventilation holes of the system? • After checking the above items and fixing any problems, turn on the system. If the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer. General Symptom The remote does not function. The system does not work normally. Problems and solutions • The distance between the remote and the unit is too far. • The batteries in the remote are weak. • When you cannot perform menu operations via the front panel display, press HOME on the remote. • Disconnect the AC power cord (mains lead) from the wall outlet (mains), then reconnect after several minutes. Picture Symptom Problems and solutions There is no picture. • Check the video connection (page 18). • The unit is not connected to the correct TV input jack (page 18). • The video input on the TV is not set so that you can view pictures from the system. • Check the output method on your system (page 18). • The unit is connected to an input device that is not HDCP (High-bandwidth Digital Content Protection) compliant ("HDMI" on the front panel does not light up) (page 18). • When playing a double-layer DVD, the video and audio may be momentarily interrupted at the point where the layers switch. No picture appears when the video output resolution selected in [Output Video Format] is incorrect. • Press and hold N and VOLUME - on the unit for more than 5 seconds to reset the video output resolution to the lowest resolution. 58US

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
58
US
Troubleshooting
If you experience any of the following difficulties while using the system, use this troubleshooting
guide to help remedy the problem before requesting repairs. Should any problem persist, consult your
nearest Sony dealer.
Note that if service personnel changes some parts during repair, these parts may be retained.
In the event of a problem with the S-AIR function, have a Sony dealer check the entire system together
(S-AIR main unit and sub unit).
Power
General
Picture
Symptom
Problems and solutions
The power is not turned on.
• Check that the AC power cord (mains lead) is connected securely.
“PROTECTOR” and “PUSH
POWER” appear alternately in
the front panel display.
Press
"
/
1
to turn off the system, and check the following items after
“STANDBY” disappears.
• Are the + and – speaker cords short-circuited?
• Are you using only the specified speakers?
• Is anything blocking the ventilation holes of the system?
• After checking the above items and fixing any problems, turn on the system. If
the cause of the problem cannot be found even after checking all the above
items, consult your nearest Sony dealer.
Symptom
Problems and solutions
The remote does not function.
• The distance between the remote and the unit is too far.
• The batteries in the remote are weak.
• When you cannot perform menu operations via the front panel display, press
HOME on the remote.
The system does not work
normally.
• Disconnect the AC power cord (mains lead) from the wall outlet (mains), then
reconnect after several minutes.
Symptom
Problems and solutions
There is no picture.
• Check the video connection (page 18).
• The unit is not connected to the correct TV input jack (page 18).
• The video input on the TV is not set so that you can view pictures from the
system.
• Check the output method on your system (page 18).
• The unit is connected to an input device that is not HDCP (High-bandwidth
Digital Content Protection) compliant (“HDMI” on the front panel does not
light up) (page 18).
• When playing a double-layer DVD, the video and audio may be momentarily
interrupted at the point where the layers switch.
No picture appears when the
video output resolution selected
in [Output Video Format] is
incorrect.
• Press and hold
N
and VOLUME – on the unit for more than 5 seconds to reset
the video output resolution to the lowest resolution.