Sony BDV-N990W Operating Instructions - Page 39
Using the Sleep Timer
View all Sony BDV-N990W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
dB. Be sure to set [Test Tone] to [On] for easy adjustment. [Front Left/Right] 0.0 dB: Set the front speaker level. [Center] 0.0 dB: Set the center speaker level. [Surround Left/Right] 0.0 dB: Set the surround speaker level. [Subwoofer] 0.0 dB: Set the subwoofer level. x [Relocation] You can correct the speaker position virtually to improve the surround effect. [On]: You can hear sound from a virtually relocated speaker position determined by [Auto Calibration]. [Off]: You can hear sound from the actual speaker position. • This setting is reflected after performing [Auto Calibration]. x [Test Tone] The speakers will emit a test tone to adjust [Level]. [Off]: The test tone is not emitted from the speakers. [On]: The test tone is emitted from each speaker in sequence while adjusting level. When you select one of the [Speaker Settings] items, the test tone is emitted from each speaker in sequence. Adjust the sound level as follows. 1 Set [Test Tone] to [On]. 2 Press X/x to select [Level], then press . 3 Press X/x to select the desired speaker type, then press . 4 Press C/c to select the left or right speaker, then press X/x to adjust the level. 5 Press . 6 Repeat Steps 3 to 5. 7 Press RETURN. The system returns to the previous display. 8 Press X/x to select [Test Tone], then press . 9 Press X/x to select [Off], then press . • The test tone signals are not output from the HDMI (OUT) jack. • To adjust the volume of all the speakers at one time, press VOL +/-. Using the Sleep Timer You can set the system to turn off at a preset time, so you can fall asleep listening to music. The time can be preset in intervals of 10 minutes. Press SLEEP. Each time you press SLEEP, the minutes display (the remaining time) in the front panel display changes by 10 minutes. When you set the sleep timer, the remaining time appears every 5 minutes. When the remaining time is less than 2 minutes, "SLEEP" flashes in the front panel display. To check the remaining time Press SLEEP once. To change the remaining time Press SLEEP repeatedly to select the desired time. 39US Other Operations