Sony BDV-N990W Operating Instructions - Page 41
Changing the preset code of the remote (Preset mode)
View all Sony BDV-N990W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Other Operations Changing the preset code of the remote (Preset mode) You can control non-Sony components by changing the preset code of the remote. 1 Press HOME. The home menu appears on the TV screen. 2 Press C/c to select [Setup]. 3 Press X/x to select [Remote Controller Setting Guide], then press . 4 Press X/x to select [Preset Mode], then press . 5 Press X/x to select the component type that you want to operate with the supplied remote, then press . 6 Press X/x to select the device's manufacturer, then press . 7 Press POP UP/MENU while pressing the operation mode button TV (for a TV) or STB (for a cable box, digital satellite receiver, digital video recorder, etc.). 8 When the TV or STB operation mode button starts flashing, enter the code on the TV screen using the number buttons, then press ENTER. If you successfully set the code, the TV or STB operation mode button will flash twice slowly. If the setting is unsuccessful, the TV or STB operation mode button will flash five times quickly. • You can quit Preset mode by pressing the TV or STB operation mode button (whichever button is flashing). • If you do not operate the remote for more than 10 seconds during presetting mode, the remote exits from presetting mode. Clearing the preset code from the remote's memory 1 Press and hold AV ?/1 first, then press VOL -, then press CH -. The BD, TV, and STB operation buttons light up. 2 Release all buttons. The BD, TV, and STB operation mode buttons turn off and the preset code is cleared. The remote returns to its default settings. Changing the Brightness of the Front Panel Display and Power Indicator Press DIMMER. Each time you press DIMMER, the brightness of the front panel display and power indicator is changed. Saving Power in Standby Mode Check that the following settings are both made: - [Control for HDMI] in [HDMI Settings] is set to [Off] (page 49). - [Quick Start Mode] is set to [Off] (page 49). 41US