Sony BRCH700 Operating Instructions - Page 54

To remove the camera, Installation on a shelf, etc. in a high, position example, upside down

Get Sony BRCH700 - CCTV Camera PDF manuals and user guides
UPC - 027242684362
View all Sony BRCH700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

8 Insert the protrusions on the ceiling bracket (A) into the spaces prepared in the ceiling bracket (B) with the f hole on the ceiling bracket (A) aligned with the s hole on the ceiling bracket (B), and temporarily attach them by turning the ceiling bracket (A) with the camera clockwise. 10 Connect the cables to the connectors on the rear of the camera. Ceiling Installation and Connections Ceiling Align. Ceiling bracket (B) 1 Ceiling bracket (A) 2 9 Secure the ceiling brackets (A) and (B) using the supplied three screws (3M3 × 8). Ceiling Note Take the proper steps to ensure that the load of the cables connected does not cause problems. 11 Attach the cable cover. For attachment, see page 50. The SONY and/or HD nameplates can be turned upside down, if necessary. To remove the camera 1 Remove the three screws used to attach the camera in step 9 of "Installation on a ceiling (example)." 2 Turn the camera with the bracket counterclockwise to remove. Installation on a shelf, etc. in a high position (example) 1 Remove the cable cover on the rear of the camera. For details on how to remove it, see "To remove the cable cover" on page 50. 3M3 × 8 (supplied) 54 Installation

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Installation and Connections
Installation
54
8
Insert the protrusions on the ceiling bracket (A) into
the spaces prepared in the ceiling bracket (B) with
the
f
hole on the ceiling bracket (A) aligned with
the
s
hole on the ceiling bracket (B), and
temporarily attach them by turning the ceiling
bracket (A) with the camera clockwise.
9
Secure the ceiling brackets (A) and (B) using the
supplied three screws (
3
M3 × 8).
10
Connect the cables to the connectors on the rear of
the camera.
Note
Take the proper steps to ensure that the load of the
cables connected does not cause problems.
11
Attach the cable cover.
For attachment, see page 50.
The SONY and/or HD nameplates can be turned
upside down, if necessary.
To remove the camera
1
Remove the three screws used to attach the camera
in step 9 of “Installation on a ceiling (example).”
2
Turn the camera with the bracket counterclockwise
to remove.
Installation on a shelf, etc. in a high
position (example)
1
Remove the cable cover on the rear of the camera.
For details on how to remove it, see “To remove the
cable cover” on page 50.
1
2
Ceiling bracket (B)
Align.
Ceiling
Ceiling
bracket (A)
Ceiling
3
M3 × 8
(supplied)
Ceiling