Sony BRCH700 Operating Instructions - Page 58

Connecting the RM-BR300 Remote Control Unit Use the RS-232C connecting cable supplied with the Remote Control Unit. to AC outlet VISCA RS-232C IN To connect the Remote Control Unit using the VISCA RS-422 connectors You can use the VISCA RS-422 connectors to connect the RM-BR300 Remote Control Unit to the camera instead of the VISCA RS-232C connectors. Use of the VISCA RS-422 connectors allows the connection up to 1,200 m (3,937 feet) away. Prepare the connecting cable using the RS-422 connector plugs that come with the camera and the Remote Control Unit. For making the cable, refer to the pin assignments of the VISCA RS-422 connector (pages 80 and 81) and the wiring diagram of VISCA RS-422 connection (page 83). For the use of the RS-422 connector plugs, see back cover. RS-232C cable* Installation and Connections VISCA RS-232C RM-BR300 Remote Control Unit DC IN 12V AC power cord* to AC outlet AC power adaptor* * supplied with the RM-BR300 Note When using the VISCA RS-232C connectors, check that the BOTTOM switch on the bottom of the camera (page 19) and the DIP switch on the bottom of the Remote Control Unit (page 23) are set to RS-232C. to AC outlet VISCA RS-422 VISCA RS-422 cable VISCA RS-422 RM-BR300 Remote Control Unit to AC outlet Notes • When using the VISCA RS-422 connectors, check that the BOTTOM switch on the bottom of the camera (page 19) and the DIP switch on the bottom of the Remote Control Unit (page 23) are set to RS-422. • When the connections using the VISCA RS-422 connectors are made, the VISCA RS-232C connection is not available. 58 Connections