Sony CDX-C910 Operating Instructions - Page 15

Notes • "*Wait*" appears in the display while the unit is reading the data, or when a disc has not been put into the unit. • "*Mem full*" appears in the display when you try to enter more than 12 tracks into a programme at one time. Playing the stored programme Changing the disc order in the changer will not affect programme memory play. You can select: •PGM 1 to play Programme 1. •PGM 2 to play Programme 2. •PGM 1+2 to play Programmes 1 and 2. 1 Press (SHIFT). 2 Press (3) (P.MODE) repeatedly until "PGM" appears. 3 Press (4) (n) repeatedly until the desired programme appears. Programme Play starts. z PGM 1 z PGM 2 z PGM 1+2 PGM off Z 4 Press (SHIFT). To go back to the normal playback mode, select "PGM off" in step 3 above. Notes • If you press the number button during programme memory play, programme memory play is interrupted, and playback of the selected disc starts. • "NO Data" appears in the display if no track is stored in the programme. • If a track stored into the programme memory is not in the disc magazine, the track will be skipped. • When the disc magazine contains not a single track stored into the programme memory, or when the programme information has not been loaded yet, "Not Ready" appears. Erasing the entire programme 1 Press (SHIFT), then press (3) (P. MODE) for two seconds. If you have labeled the disc, the bank edit mode appears. Press (3) (P.MODE) to display "PGM edit" above. 2 Press (1) (N) repeatedly until "DEL" appears. DEL PGM edit EQ SUR --PGM1-- To erase Programme 2, press (4) (n) repeatedly until "PGM 2" appears. 3 Press (5) (ENTER) for two seconds. P1 PGM edit EQ SUR NO data The entire programme is erased. 4 When you finish erasing programmes, press (3) (P.MODE) for two seconds. 5 Press (SHIFT). Adding tracks to the programme 1 Press (SHIFT), then press (3) (P.MODE) for two seconds. If you have labeled the disc, the bank edit mode appears. Press (3) (P.MODE) to display "PGM edit" above. EN To select Programme 2, press (4) (n) repeatedly until "P 2" appears. CD/MD Changer 2 Press (1) (N) or (4) (n) to select the track slot number where you want to insert a track. Track slot number CD2 PGM edit EQ SUR 2 4 P1.,3 DISC TRACK 3 Press either side of (SEEK/AMS) to select the track you want to insert. 4 Press (5) (ENTER) momentarily to enter the track. The current track in that slot number and the succeeding tracks shift down. To continue inserting tracks, repeat steps 2 through 4. Note Once all 12 slots have been filled, "*Mem full*" appears in the display, and you cannot insert more tracks. 5 When you finish inserting tracks, press (3) (P.MODE) for two seconds. 6 Press (SHIFT). 15 Actual total number: Sony CDX-C910 (E,S,C) 3-856-715-11 (2)