Sony CDX-GT565UP Operating Instructions - Page 22
Adjusting setup items - color change button
View all Sony CDX-GT565UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Adjusting setup items 1 Press and hold the select button. The setup display appears. 2 Rotate the control dial until the desired item appears, then press it. 3 Rotate the control dial to select the setting, then press it.* The setting is complete. 4 Press (BACK). * For CLOCK-ADJ and BTM settings, step 4 is not necessary. The following items can be set depending on the source and setting: CLOCK-ADJ (Clock Adjust) (page 5) CT (Clock Time) Activates the CT function: "ON," "OFF" (page 10). BEEP Activates the beep sound: "ON," "OFF." CAUT ALM*1 (Caution Alarm) Activates the caution alarm: "ON," "OFF" (page 5). AUX-A*1 (AUX Audio) Activates the AUX source display: "ON," "OFF" (page 23). AUTO OFF Shuts off automatically after a desired time when the unit is turned off: "NO," "30S (Seconds)," "30M (Minutes)," "60M (Minutes)." REAR/SUB*1 Switches the audio output: "SUB-OUT" (subwoofer), "REAR-OUT" (power amplifier). DEMO (Demonstration) Activates the demonstration: "ON," "OFF." 22 DIMMER Changes the display brightness. - "AT": to dim the display automatically when you turn lights on. (Available only when the illumination control lead is connected.) - "ON": to dim the display. - "OFF": deactivate the dimmer. COLOR (Preset Color) Selects the preset color of the display and buttons on the main unit (page 17). CUSTOM-C (Custom Color) Selects a preset color as a basis for further customizing (page 17). SND SYNC Selects the color with sound synchronization: "ON," "OFF." WHT MENU Sets the effect when the source is switched: "ON," "OFF." START-WHT Sets the start up color: "ON," "OFF." M.DISPLAY (Motion Display) - "SA": to show moving patterns and spectrum analyzer. - "OFF": to deactivate the Motion Display. AUTO SCR (Auto Scroll) Scrolls long items automatically: "ON," "OFF." ZAP TIME (Zappin Time) Selects the playback time for the ZAPPIN function. - "Z.TIME-1 (about 6 seconds)," "Z.TIME-2 (about 15 seconds)," "Z.TIME-3 (about 30 seconds)." ZAP BEEP (Zappin Beep) Has the beep sound between track passages: "ON," "OFF." LPF FREQ*2 (Low Pass Filter Frequency) Selects the subwoofer cut-off frequency: "50Hz," "60Hz," "80Hz," "100Hz," "120Hz."