Sony CDX-GT805DX Owners manual - Page 15
Using optional equipment, CD/MD changer - am fm cd receiver
View all Sony CDX-GT805DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Auto Scroll To scroll long displayed item automatically when the disc/album/group/track is changed. - "off" (z): to not scroll. - "on": to scroll. RECEIVE MODE Local (Local seek mode) - "off" (z): to tune normal reception. - "on": to only tune into stations with stronger signals. Mono (Monaural mode)*2 To improve poor FM reception, select monaural reception mode. - "off" (z): to hear stereo broadcast in stereo. - "on": to hear stereo broadcasts in monaural. IF - "Auto" (z): to narrow automatically the reception frequency to eliminate noise. - "Wide"*3: to always hear FM stereo broadcasts in stereo and with full the frequency signal reception. BTM (page 8) SOUND HDEQ (page 11) DSO 3D (page 12) I-TA (page 12) Front HPF (High Pass Filter) To select the front speaker cut-off frequency: "off" (z), "63Hz," "78Hz," "100Hz," "125Hz" or "160Hz." Rear HPF (High Pass Filter) To select the rear speaker cut-off frequency: "off" (z), "63Hz," "78Hz," "100Hz," "125Hz" or "160Hz." LPF (Low Pass Filter) To select the subwoofer cut-off frequency: "off" (z), "63Hz," "78Hz," "100Hz," "125Hz" or "160Hz." BBE MP (page 2) Loudness To allow you to listen clearly at low volume levels. - "on": to reinforce bass and treble. - "off" (z): to not reinforce bass and treble. AUX Level To adjust the volume level for each connected auxiliary equipment. This setting negates the need to adjust the volume level between sources (page 16). LIST When the radio or CD/MD changer is used, the station frequency, or CD/MD number/track name is displayed. *1 When the unit is turned off. *2 When FM is received. *3 In such cases, some FM stereo broadcasts may become monaural while in the stereo reception mode. Using optional equipment CD/MD changer Selecting the changer 1 Press (SOURCE) repeatedly until "CD" or "MD" appears. 2 Press (MODE) repeatedly until the desired changer appears. Unit number, MP3 indication*1 LP2/LP4 indication*2 Disc/Album number Playback starts. *1 When MP3 is played. *2 When MDLP disc is played. Skipping discs 1 During playback, press (ENTER) until "DISC" appears. 2 Rotate the SEEK control dial until the desired disc appears. Skipping album and discs with the card remote commander 1 During playback, press M or m. To skip album album continuously discs discs continuously Press M or m. and release (hold for a moment). within 2 seconds of first releasing. repeatedly. then, press again within 2 seconds and hold. 15 continue to next page t