Sony CMT-DH7BT Operating Manual - Page 72
Self-diagnosis Function, To return the DVD setup to the default
View all Sony CMT-DH7BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
If the system still does not operate properly after performing the above measures or other troubles not described above occur, reset the system as follows: Use buttons on the unit to reset the system to its factory default settings. 1 Unplug the power cord. 2 Plug the power cord back in. 3 Press to turn on the system. 4 Press , DISPLAY and at the same time. "RESET" appears in the display. The system is reset to the factory settings except for DVD settings. You should set the settings you made, such as the preset stations, clock and timer. To return the DVD setup to the default settings*, perform reset as follows: 1 Press DISPLAY when playback is stopped. The Control Menu appears on the TV screen. 2 Press or repeatedly to select (SETUP), then press ENTER . 3 Press or repeatedly to select "RESET," then press ENTER . 4 Press or repeatedly to select "YES," then press ENTER . It takes a few seconds to complete. Do not press when resetting the system. * Except for Parental Control settings Self-diagnosis Function (When letters/numbers appear in the display) When the self-diagnosis function is activated to prevent the system from malfunctioning, a 5-character service number (e.g. C 13 50) with a combination of a letter and 4 digits appears on the TV screen and the front panel display. In this case, check the following table. First 3 characters of the service number Cause and corrective action C 13 C 31 E XX (XX is a number) This disc is dirty. Clean the disc with a soft cloth (page 75). The disc is not inserted correctly. Restart the system, then re-insert the disc correctly. To prevent a malfunction, the system has performed the self-diagnosis function. Contact your nearest Sony dealer or local authorized Sony service facility and give the 5-character service number. Example: E 61 10 72GB