Sony CMT-HPZ9 Operating Instructions - Page 12
Setting the clock, Inserting two R6 size AA, batteries into the remote
View all Sony CMT-HPZ9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Inserting two R6 (size AA) batteries into the remote Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. When carrying this system Perform the following procedure to protect the CD mechanism. Use buttons on the unit for the operation. 1 Press ?/1 to turn on the system, then press FUNCTION repeatedly to switch the function to CD. 2 Make sure that all discs are removed from the system. 3 Hold down ILLUMINATION, and then press x and DISC1 until "LOCK" appears. 4 Unplug the power cord. Setting the clock Use buttons on the remote for the operation. 1 Press ?/1 to turn on the system. 2 Press CLOCK/TIMER SET. 3 Press . or > repeatedly to set the hour. 4 Press ENTER. 5 Press . or > repeatedly to set the minute. 6 Press ENTER. The clock starts working. To adjust the clock 1 Press CLOCK/TIMER SET. 2 Press . or > repeatedly to select "CLOCK SET", then press ENTER. 3 Do the same procedures as step 3 to 6 above. Note The clock is not displayed in Power Saving Mode (page 26). 12GB