Sony CMT-HPZ9 Operating Instructions - Page 15

Searching for tracks with the jog dial, CD - Play - operating manual

Page 15 highlights

CD - Play Notes • You cannot change the play mode during playback. • Some time may be needed to start playback of discs recorded in complex configurations such as many layers. • Before playing back a track, the system reads all tracks and groups on the disc. During this time, "READING" appears on the display. Depending on disc content, some time may be needed to read the disc. • A group that does not include MP3 tracks is skipped. • Depending on the encoding/writing software, recording device or the recording media used at the time an MP3 track is recorded, you may encounter such problems as disabled playback, sound interruptions and noise. • When playing back an MP3 track, the playback elapsed time indication may differ from the actual time in the following cases. - When you play back a VBR (variable bit rate) MP3 track - When you perform fast forward or rewind (Manual Search) Tip When disc access takes a long time, set "CD POWER" and "ON" by CD power manage function (page 19). Searching for tracks with the jog dial You can quickly search for and play the desired track by using the jog dial on the unit. Use buttons on the unit for the operation. 1 Press FUNCTION repeatedly to switch the function to CD. 2 Press DISC SKIP/EX-CHANGE repeatedly to select a disc in stop mode. 3 Turn the jog dial in stop mode to select the desired track, then press PUSH ENTER. To search for tracks on the ATRAC CD or MP3 CD, turn the jog dial to first select the desired group, then press PUSH ENTER before performing step 3. Playback starts from the selected track. Note Only the first 6 characters are displayed when performing the group or track search. Tip You can search for and play other tracks in the selected group during playback. To select a track of another group during playback, turn the jog dial counterclockwise until "GROUP" appears, then press PUSH ENTER and select a group. You can then select the desired track by turning the jog dial. To cancel the track search Press CANCEL. Notes • If you do not perform any operations for approximately 8 seconds, the display returns to the previous one. • The track search is not possible in Program Play mode. • The track search is only possible for the current disc. 15GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

CD – Play
15
GB
Notes
You cannot change the play mode during playback.
Some time may be needed to start playback of discs
recorded in complex configurations such as many
layers.
Before playing back a track, the system reads all
tracks and groups on the disc. During this time,
“READING” appears on the display. Depending on
disc content, some time may be needed to read the
disc.
A group that does not include MP3 tracks is skipped.
Depending on the encoding/writing software,
recording device or the recording media used at the
time an MP3 track is recorded, you may encounter
such problems as disabled playback, sound
interruptions and noise.
When playing back an MP3 track, the playback
elapsed time indication may differ from the actual
time in the following cases.
When you play back a VBR (variable bit rate)
MP3 track
When you perform fast forward or rewind (Manual
Search)
Tip
When disc access takes a long time, set “CD POWER”
and “ON” by CD power manage function (page 19).
You can quickly search for and play the desired
track by using the jog dial on the unit.
Use buttons on the unit for the operation.
1
Press FUNCTION repeatedly to switch
the function to CD.
2
Press DISC SKIP/EX-CHANGE
repeatedly to select a disc in stop
mode.
3
Turn the jog dial in stop mode to select
the desired track, then press PUSH
ENTER.
To search for tracks on the ATRAC CD or
MP3 CD, turn the jog dial to first select the
desired group, then press PUSH ENTER
before performing step 3.
Playback starts from the selected track.
Note
Only the first 6 characters are displayed when
performing the group or track search.
Tip
You can search for and play other tracks in the selected
group during playback. To select a track of another
group during playback, turn the jog dial
counterclockwise until “GROUP” appears, then press
PUSH ENTER and select a group. You can then select
the desired track by turning the jog dial.
To cancel the track search
Press CANCEL.
Notes
If you do not perform any operations for
approximately 8 seconds, the display returns to the
previous one.
The track search is not possible in Program Play
mode.
The track search is only possible for the current disc.
Searching for tracks with
the jog dial