Sony CMT-HPZ9 Operating Instructions - Page 28

Optional Components Hooking up optional components To enhance your system, you can connect optional components. Refer to the operating instructions provided with each component. +/1 A HS s HS lj JL i From the audio output jacks of an optional analog component Optional analog component To the digital input jack of an optional digital component Optional digital component A ANALOG IN jack Use audio cord (not supplied) to connect an optional analog component (MiniDisc player/ recorder or Portable Audio player, etc.) to this jack. You can then record or listen to the sound from the component through this system. B CD DIGITAL OUT jack Use a digital optical cord (square, not supplied) to connect an amplifier, MiniDisc player/ recorder or DAT deck with a digital optical input jack. Sound is then output when the system function is set to CD. If the jack is covered with a cap, remove it before use. Notes • There is no digital audio output from this jack during playback of ATRAC3plus/MP3 tracks. • You cannot make a digital recording of a copy guarded disc using a digital component connected to this system. Also, playback may not be possible depending on the connected component. • Before connecting or disconnecting the audio cord (not supplied), press VOLUME - repeatedly (or turn the VOLUME control on the unit counterclockwise) to turn down the volume. 28GB