Sony CMT-HPZ9 Operating Instructions - Page 13

CD - Play CD - Play Loading a disc Use buttons on the unit for the operation. 1 Press Z. 2 Insert discs with the label side facing forward. Check that the lever on the left side of the respective slot raises. When you play a disc, insert it with the label side forward. To remove discs 1 Press Z. 2 Hold down the lever on the left side of the respective slot to elevate the disc, then lift it out with your other hand. DISC 1 - 5 slot (for 12 cm disc only) DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 3 Press Z. Place the disc so that it is flush with the gray side of the slot, then insert it vertically. To exchange discs during playback 1 Press DISC SKIP/EX-CHANGE during playback. 2 Remove and insert discs in any slot except that of the currently playing disc. Notes • Do not place anything (such as the remote or cords) in front of the disc tray. When opening the disc tray, it may catch and cause malfunction. • Do not use a disc with tape, seals or paste on it as this may cause malfunction. • Do not use a non-standard shape disc. • Do not load an 8 cm disc. Doing so may cause the system to malfunction. • When you eject a disc, handle the disc by its edge. Do not touch the surface. • When using the DISC SKIP/EX-CHANGE function, be sure that you do not insert a disc in the slot of the current playing disc. If you do, "CHECK" and the respective disc number will be displayed alternately. This may cause malfunction. 13GB