Sony CMT-L1 Operating Instructions - Page 16
Listening to the radio — Preset Tuning/Manual Tuning, Other operations - manuals
View all Sony CMT-L1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Presetting radio stations (continued) Other operations To Tune in a weak station Cancel presetting Change the preset number Do this Follow the procedure described in "Setting presets through manual tuning". Press MENU/NO on the remote in step 5 or 6. Start over from step 1. To change the AM tuning interval (not applicable on the European model) The AM tuning interval is factory-preset to 9 kHz (or 10 kHz for some areas). To switch the AM tuning interval, tune in any AM station first, then turn off the system. Pressing and holding down FUNCTION, turn the system back on. When you change the interval, all the AM preset stations are erased. To change back to the original interval, repeat the same procedure. Tips • The preset stations are saved in the system's memory for about a day even if you disconnect the power cord or a power failure occurs. • You can label the preset stations (see page 17). • To improve the reception, adjust the supplied antennas or connect an external antenna. Listening to the radio You can listen to a radio station either by selecting a preset station or by manually tuning in a station. Listening to a preset station - Preset Tuning Preset radio stations in the tuner's memory first (see "Presetting radio stations" on page 15). 1 Press TUNER/BAND to select "FM" or "AM". 2 Press PLAY MODE/TUNING MODE repeatedly until "PRESET" appears in the display. 3 Press TUNING + or - repeatedly to select the desired preset station (or station name* or RDS station name**). * The station name appears only if you have labelled the station (see "Labelling the preset stations " on page 17). ** European model only. To select a desired preset number using the numeric buttons on the remote Press numeric buttons instead of performing step 3. To enter preset number over 10, press >10 and enter the corresponding digits. To enter 0, press 10/0 instead. Example: To enter preset number 20, press >10, then 2 and 10/0. Listening to a non-preset radio station - Manual Tuning 1 Press TUNER/BAND to select "FM" or "AM". 2 Press PLAY MODE/TUNING MODE repeatedly until "AUTO" and "PRESET" disappear from the display. 3 Press TUNING + or - repeatedly to tune in the desired station. Tips • To improve the reception, adjust the supplied antennas or connect an external antenna. • If there is static during an FM broadcast, press FM MODE on the remote until "MONO" appears in the display. The broadcast will no longer be in stereo, but the reception will improve. • In step 2, press PLAY MODE/TUNING MODE repeatedly until "AUTO" appears in the display, and then press TUNING + or -. The frequency indication changes and the scanning stops when the system tunes in a station (Automatic Tuning). 16GB