Sony CMT-L1 Operating Instructions - Page 23
Listening to audio from a connected component, Recording on a connected component
View all Sony CMT-L1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Listening to audio from a connected component 1 Connect the audio cord. See "Hooking up optional components" on page 22. 2 Press FUNCTION repeatedly until "MD" or "TAPE" appears. Start playing the connected component. To switch the function from "MD" to "TAPE" When you listen to the connected tape deck, do the following procedure. 1 Turn on the system. 2 Press FUNCTION repeatedly until "MD" appears. 3 Press MENU/NO on the remote. "TAPE?" appears. 4 Press ENTER/YES on the remote. To switch back to "MD", do the procedure again. Recording on a connected component Making a digital recording on a digital component 1 Connect the digital optical cable. See "Hooking up optional components" on page 22. 2 Start recording. Refer to the operating instructions provided with connected component. Making an analog recording on a component 1 Connect the audio cord. See "Hooking up optional components" on page 22. 2 Start recording. Refer to the operating instructions provided with connected component. Optional Components 23GB