Sony CPD-200SF Operating Instructions (primary manual) - Page 4

Getting Started Before using this monitor, please make sure that the following items are included in your package: Multiscan 100sf/200sf monitor (1), power cord (1), Macintosh adapter (1), warranty card (1) and this operating instruction manual (1). This monitor will sync with any IBM or compatible system equipped with VGA or greater graphics capability. Although this monitor will sync to other platforms running at horizontal frequencies between 30 and 70 kHz (Multiscan 100sf), 30 and 80kHz (Multiscan 200sf), including Macintosh and Power Macintosh system, a cable adapter is required. Please consult your dealer for advice on which adapter is suitable for your needs. Step 1: With the computer switched off, attach the video signal cable to the video output. IBM or compatible computer to video output Apple computer HD15 - HD15 adapter (not supplied) may be required to video output Macintosh adapter (supplied) Notes : • Use a HD15 (Female) - HD15 (Male without the No.9 pin) adapter (not supplied) for any current DOS computer which is not compatible with DDC 2 AB and its No.9 pin is disconnected. • Supplied Macintosh adapter is compatible with Macintosh LC, Performa, Quadra and Power Macintosh series computers. Macintosh II series and some older version of PowerBook models may need an adapter with micro switches. Step 2: Attach the power cord to the monitor and the other end to a power outlet. Power cord (supplied) to a power outlet Step 3: Turn on the monitor and computer. Step 4: If necessary, adjust the user controls according to your personal preference. The installation of your Multiscan 100sf/200sf is complete. Enjoy your monitor. 1) VGA is a trademark of IBM Corporation. 2) VESA is a trademark of the non-profit organization, Video Electronics Standard Association. 3) Macintosh is a trademark of Apple Computer Inc. 4) Windows® is a registered trademark of Microsoft Corporation in the United States and other countries. 4 Using Your Monitor Preset and User Modes The Multiscan 100sf/200sf has factory preset modes for the 7 most popular industry standards for true "plug and play" capability. For less common modes, the Multiscan 100sf/200sf 's Digital Multiscan Technology will perform all of the complex adjustments necessary to ensure a high quality picture for any timing between 30 and 70␣ kHz (Multiscan 100sf ), 30 and 80␣ kHz (Multiscan 200sf ). CPD-100SF No. Resolution Horizontal Vertical Graphics (dots × lines) Frequency Frequency Mode 1 640 × 480 31.5 kHz 60 Hz VGA Graphic 1) 2 800 × 600 46.9 kHz 75 Hz VESA 2) 3 800 × 600 53.7 kHz 85 Hz 4 832 × 624 49.7 kHz 75 Hz 5 1024 × 768 60.0 kHz 75 Hz VESA 2) Macintosh 16" Color 3) VESA 2) 6 1024 × 768 68.7 kHz 85 Hz VESA 2) 7 1280 × 1024 64.0kHz 60 Hz VESA 2) CPD-200SF No. Resolution Horizontal Vertical Graphics (dots × lines) Frequency Frequency Mode 1 640 × 480 31.5 kHz 60 Hz VGA Graphic 1) 2 800 × 600 46.9 kHz 75 Hz VESA 2) 3 800 × 600 53.7 kHz 85 Hz 4 832 × 624 49.7 kHz 75 Hz 5 1024 × 768 60.0 kHz 75 Hz 6 1024 × 768 60.2 kHz 75 Hz VESA 2) Macintosh 16" Color 3) VESA 2) Macintosh 19" Color 3) 7 1024 × 768 68.7 kHz 85 Hz 8 1152 × 870 68.7 kHz 75 Hz 9 1280 × 1024 80.0 kHz 75 Hz VESA 2) Macintosh 21" Color 3) VESA 2) For the customers using the Windows®4)95 Install the new model information of the Sony computer display from "Windows95 Monitor Information Disk" into your PC. (To install the file, refer to the attached "About the Windows95 Monitor Information Disk/File"). This monitor complies with "VESA DDC," the standards of Plug&Play. If your PC/graphic board complies with DDC, select "Plug and Play Monitor (VESA DDC)" or this monitor's model name (CPD-100SF or CPD-200SF) as "Monitor type" from "Control Panel" on Windows95. Some PC/graphic boards do not comply with DDC. Even if they comply with DDC, they may have some problems on connecting this monitor. In this case, select this monitor's model name (CPD-100SF or CPD-200SF) as "Monitor type" on Windows95. Recommended horizontal timing conditions Horizontal sync width should be: >1.0 µsec. Horizontal blanking width should be: >3.6 µsec. (Multiscan 100sf)/ >3.0 µsec. (Multiscan 200sf) Vertical sync width should be: < 560 µsec. Note CPD-100SF does not apply to Macintosh 21" color mode.