Sony CPD-E400 Operating Instructions - Page 6

Setup Before using your monitor, check that the following accessories are included in your carton: • Power cord • Current G3 adapter (for beige system) (1) • Setup Disk (1) • Warranty card • Notes on cleaning the screen's surface • This instruction manual Step 1: Connect your monitor to your computer Turn off the monitor and computer before connecting. Note Do not touch the pins of the video signal cable connector as this might bend the pins. x Connecting to an IBM PC/AT or compatible computer AC IN (HD15) 1 x Connecting to a Macintosh or compatible computer AC IN (HD15) 1 Current G3 adapter (for beige system) (supplied)* Macintosh or to video compatible computer output * Connect the supplied Macintosh adapter to the computer before connecting the cable. This adapter is compatible with Macintosh LC, Performa, Quadra, Power Macintosh, and Power Macintosh G3 series computers that have two rows of pins. If you are connecting to the other version of Power Macintosh G3 series with three rows of pins or models other than those stated above, you will need a different adapter (not supplied). to video output IBM PC/AT or compatible computer 6