Sony CPD-G220R Operating Instructions - Page 15

Self-diagnosis function This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer, the screen will go blank and the 1 (power) indicator will either light up green or flash orange. If the 1 (power) indicator is lit in orange, the computer is in power saving mode. Try pressing any key on the keyboard. MENU 1 (power) indicator If the screen is blank and the 1 (power) indicator is green 1 Disconnect the video input cable or turn off the connected computer. 2 Press the 1 (power) button twice to turn the monitor off and then on. 3 Move the joystick , for 2 seconds. If all four color bars appear (white, red, green, blue), the monitor is working properly. Reconnect the video input cable and check the condition of your computer. If the color bars do not appear, there is a potential monitor failure. Inform your authorized Sony dealer of the monitor's condition. If the 1 (power) indicator is flashing orange Press the 1 (power) button twice to turn the monitor off and then on. If the 1 (power) indicator lights up green, the monitor is working properly. If the 1 (power) indicator is still flashing, there is a potential monitor failure. Count the number of seconds between orange flashes of the 1 (power) indicator and inform your authorized Sony dealer of the monitor's condition. Be sure to note the model name and serial number of your monitor. Also note the make and model of your computer and video board. Specifications CRT Viewable image size Viewing image Resolution Maximum Recommended Standard image area Deflection frequency* AC input voltage/current Power consumption Dimensions Monitor weight Plug and Play Supplied accessories 0.24 mm aperture grille pitch (center) 17 inches measured diagonally 90-degree deflection FD Trinitron Approx. 328 × 242 mm (w/h) (13 × 9 5/8 inches) 408 mm (16.1 inches) Horizontal: 1600 dots Vertical: 1200 lines Horizontal: 1024 dots Vertical: 768 lines Approx. 312 × 234 mm (w/h) (12 3/8 × 9 1/4 inches) Horizontal: 30 to 85 kHz Vertical: 48 to 170 Hz 100 to 240 V, 50/60 Hz, Max. 1.7 A 115 W Approx. 402 × 418 × 421 mm (w/h/d) (15 7/8 × 16 1/2 × 16 5/8 inches) Approx. 19 kg (41.9 lb) DDC2B/DDC2Bi/GTF See page 6 US For CPD-G220S model only Audio Input Input Impedance: 47 kΩ Input Level: 0.5 Vrms (typical) Input Connector Stereo mini jack Headset Output Output Level: 1.5 mW + 1.5 mW (RL: 16 W/Input: 0.5 Vrms) Output Connector Stereo mini jack Speaker Output 0.5 W (Max.) * Recommended horizontal and vertical timing condition • Horizontal sync width should be more than 1.0 µsec. • Horizontal blanking width should be more than 3.0 µsec. • Vertical blanking width should be more than 500 µsec. Design and specifications are subject to change without notice. 15