Sony DCR-DVD403 Operating Guide - Page 98
Connecting to a computer Except for DCR-DVD92/DVD602, The computer does not recognize your camcorder. - usb driver
UPC - 027242670075
View all Sony DCR-DVD403 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Troubleshooting (continued) Connecting to a computer (Except for DCR-DVD92/DVD602) The computer does not recognize your camcorder. • Install the Picture Package software (p.82). • Disconnect the cable from the computer and camcorder, then connect it again firmly. • Disconnect USB device other than the keyboard, the mouse, and the camcorder from the computer. • Disconnect the cable from the computer and camcorder, restart the computer, then connect them again correctly. • Confirm the USB driver is correctly installed with the following procedures. For Windows XP 1 Click [Start], then [Control Panel]. 2 Click [Performance and Maintenance], then [System]. The [System Properties] window appears. 3 Click [Hardware] tab. 4 Click [Device Manager]. The [Device Manager] window appears. 5 Make sure that [SONY DDX-C1000 USB Device] appears in [DVD/CD-ROM drives], [Generic volume] in [Storage volumes], and [USB Mass Storage Device] in [Universal Serial Bus controllers] respectively. When all the devices appear, the USB driver is installed correctly. If any of these devices are not shown, install USB driver. Place the supplied CD-ROM in the disc drive on your computer. Double-click [My Computer]. Right-click [PICTUREPACKAGE] icon (Disc drive)*, then click [Open]. *Drive names (such as (E:)) may vary depending on the computer. Double-click [Driver] [Setup.exe]. 98