Sony DCR-TRV10 Service Manual - Page 116
Backlight Consumption Current Adjustment, DD-123 board, White Balance Adjustment DD-123 board, Address
View all Sony DCR-TRV10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
4. Backlight Consumption Current Adjustment (DD-123 board) Set the backlight luminance and color temperature. If deviated, the image may become dark or bright. Mode Camera Subject Measurement Point Arbitrary + Probe: Pin 2 of CN2904 (EVF BL +) on VC-217 board - Probe: Pin 3 of CN2904 (EVF BL -) on VC-217 board Measuring Instrument Digital voltmeter Adjustment Page D Adjustment Address 76 Specified Value A = 17.0 ± 1.0mVdc Adjusting method: 1) Select page: 0, address: 01, and set data: 01. 2) Select page: D, address: 76, change the data and set the voltage difference (A) between Pin 2 of CN2904 (EVF BL +) and Pin 3 of CN2904 (EVF BL -) to the specified value. 3) Press the PAUSE button of the adjustment remote commander. 4) Select page: 0, address: 01, and set data: 00. 5. White Balance Adjustment (DD-123 board) Correct the white balance. If deviated, the reproduction of the EVF screen may degenerate. Mode Camera Subject Arbitrary Measurement Point Check on EVF screen Measuring Instrument Adjustment Page D Adjustment Address 71, 72 Specified Value The EVF screen should not be colored. Adjusting method: 1) Select page: 0, address: 01, and set data: 01. 2) Select page: 3, address: 0C, set data: 20, and press the PAUSE button of the adjustment remote commander. 3) Select page: 3, address: 22, set data: 0B, and press the PAUSE button of the adjustment remote commander. 4) Select page: D, address: 71 and 72, set the data to the initial value. Note: Press the PAUSE button of the adjustment remote commander each time to set the data. Data Address DCR-TRV10 DCR-TRV8 DCR-TRV10E DCR-TRV8E 71 72 8B 6A 99 5A 80 62 9A 59 5) Check that the EVF screen is not colored. If colored, change the data of page: D, address: 71 and 72 so that the EVF screen is not colored. Note: To write in the non-volatile memory (EEPROM), press the PAUSE button of the adjustment remote commander each time to set the data. 6) Select page: 3, address: 22, set data: 00, and press the PAUSE button of the adjustment remote commander. 7) Select page: 3, address: 0C, set data: 00, and press the PAUSE button of the adjustment remote commander. 8) Select page: 0, address: 01, and set data: 00. 5-30