Sony DCR-TRV10 Service Manual - Page 98
INITIALIZATION OF B DATA, Address, Remark, Initial value, Switch setting, Initializing Method - camcorder manual
View all Sony DCR-TRV10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
*1: No mark: DCR-TRV10/TRV10E < >: DCR-TRV8/TRV8E Address Initial value Remark NTSC PAL 77 Fixed data-1 78 Fixed data-2 79 Fixed data-1 7A 92 99 Bright adj.(EVF)*1 7B A1 B0 Contrast adj.(EVF)*1 7C Fixed data-1 7D (Initialized data) 7E 7F 80 97 A6 White balance adj.(LCD)*1 81 70 73 82 BA 9E D range adj.(LCD)*1 83 A8 4D V-COM level adj.(LCD)*1 84 7A 6E VCO adj.(LCD)*1 85 66 96 V-COM adj.(LCD)*1 86 Fixed data-1 87 (Initialized data) 88 89 8A 67 7F Bright adj.(LCD)*1 8B Fixed data-1 8C A7 C3 Contrast adj.(LCD)*1 8D Fixed data-1 8E (Initialized data) 8F 90 Fixed data-2 91 Fixed data-1 92 (Initialized data) 93 94 Fixed data-2 95 (Modified data, copy the data built in the same model.) 96 Fixed data-1 97 Fixed data-2 98 Fixed data-1 99 (Initialized data) 9A 9B 9C 9D 9E 9F Table. 5-1-3. 1-2-3. INITIALIZATION OF B PAGE DATA 1. Initializing the B Page Data Note: If the B page data has been initialized, the following adjustments need to be performed again. 1) Modification of B page data Adjusting page Adjusting Address B 00 to FF Switch setting POWER MEMORY Initializing Method: 1) Select page: 0, address: 01, and set data: 01. 2) Select page: 2, address: 8F, set data: 03, and press the PAUSE button. 3) Select page: 2, address: 8F, set data: 00, and press the PAUSE button. 4) Select page: 5, address: 01, set data: F3, and press the PAUSE button. 5) Select page: 5, address: 00, set data: 01, and press the PAUSE button. 6) Select page: 5, address: 02, and check that the data is "00". 7) Perform "Modification of B Page Data". 2. Modification of B Page Data If the B page data has been initialized, change the data of the "Fixed data-2" address shown in the following tables by manual input. Processing before Modification of B Page data 1) Select page: 2, address: 8F, set data: 03, and press the PAUSE button. 2) Select page: 2, address: 8F, set data: 00, and press the PAUSE button. Modifying Method: 1) Before changing the data, select page: 0, address: 01, and set data: 01. 2) New data for changing are not shown in the tables because they are different in destination. When changing the data, copy the data built in the same model. Note: If copy the data built in the different model, the camcorder may not operate. 3) When changing the data, press the PAUSE button of the adjustment remote commander each time when setting new data to write the data in the non-volatile memory. Processing after Completing Modification of B Page data 1) Select page: 2, address: 00, and set data: 29. 2) Select page: 2, address: 01, and set data: 29, and press the PAUSE button of the adjustment remote commander. 5-12