Sony DCR-TRV17 Operating Instructions (primary manual) - Page 31
Playing back a tape
View all Sony DCR-TRV17 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Playback - Basics - Playback - Basics - Playing back a tape You can monitor the playback picture on the screen. If you close the LCD panel, you can monitor the playback picture in the viewfinder. You can control playback using the Remote Commander supplied with your camcorder. (1) Install the power source and insert the recorded tape. (2) Set the POWER switch to VCR while pressing the small green button. (3) To open the LCD panel, press OPEN. (4) Press m to rewind the tape. (5) Press N to start playback. (6) To adjust the volume, press either of the two buttons on VOLUME. The speaker on your camcorder is silent when the LCD panel is closed. 6 VOLUME 4 REW 5 PLAY 2 VCR POWER OFF(CHG) CAMERA 3 MEMORY 1 To stop playback Press x. When monitoring on the LCD screen You can turn the LCD panel over and move it back to the camcorder body with the LCD screen facing out. When you open or close the LCD panel Make sure that the LCD panel is set vertically. 31