Sony DPF D100 Operating Instructions - Page 16

Operations in an initial state When the photo frame is turned on without a memory card connected, the initial display below appears on the screen. When the photo frame is not operated for 10 seconds, demo mode is displayed. If any other button than the power button is pressed, the screen returns to initial display. First, press MENU during initial display, and then set the date and time. Setting the clock The clock of the photo frame needs to be adjusted in order to display an accurate time in the clock and calendar view modes. 1 Press MENU on the remote control. The menu screen is displayed. 2 Press v/V to select [Various settings] and then press to display the Various settings screen. 3 Press v/V to select [Date/time settings] and then press . The Date/time settings screen is displayed. 16 GB 4 Select the format of the date. 1Press v/V to select [Date Display Order] and then press . 2Press v/V to select a format and then press . • Y/M/D • M/D/Y • D/M/Y 5 Adjust the date. 1Press v/V to select [Date] and then press . 2Press v/V to select a value and then press . 6 Adjust the time. 1Press v/V to select [Time] and then press . 2Press v/V to select a value and then press .