Sony DPF D92 Operating Instructions - Page 15
Basic operations, Preparing the remote control - b photo frame
UPC - 027242763425
View all Sony DPF D92 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Basic operations Preparing the remote control The supplied lithium battery (CR2025) has already been inserted into the remote control. Pull out the protective sheet before use as shown in the figure. Protective sheet Replacing the battery of the remote control If the remote control stops working, replace the battery (CR2025 lithium battery) with a new one. 1 Pull out the battery holder. While pressing in the tab of the battery holder, pull out the battery holder. Basic operations Using the remote control Point the top end of the remote control towards the remote sensor on the photo frame. 2 Remove the old battery from the battery holder and then insert a new battery. Insert the battery so that "+" is facing upwards. Remote sensor Note The photo frame may fall if you use the buttons on the photo frame when it is hanging on the wall. Operate the photo frame using the remote control. 3 Reinsert the battery holder into the remote control. WARNING Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire. Notes • When the lithium battery becomes weak, the operating distance of the Remote control may shorten, or the Remote control may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion. Continued 15 GB