Sony DPF X1000 Operating Instructions - Page 23
Turning the photo frame on, When the power switch is set to, Turning off the power - 10 2
UPC - 027242763333
View all Sony DPF X1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Basic operations Turning the photo frame on When the power switch is set to off When the power switch is set to on, the standby indicator turns green and the Sony logo on the front panel lights up. Turning off the power Hold 1 (on/standby) on the photo frame or remote control until the power turns off. The standby indicator turns to red from green. Note Do not turn the photo frame off or disconnect the AC adaptor from the photo frame before the standby indicator turns red. Doing so may damage the photo frame. Operations in an initial state When the photo frame is turned on without a memory card connected, the initial display below appears on the screen. When the power switch is set to on Press 1 (on/standby) on the photo frame or remote control to turn on the power. The standby indicator turns to green from red. The Sony logo on the front panel lights up. If the photo frame is not operated for 10 seconds, the demo mode is displayed. If any other button than the power button is pressed, the screen returns to the initial display. First, press MENU during the initial display, and then set the date and time. 23 GB