Sony DR-GA500 Operating Instructions - Page 10
Step 1-C: Connecting a 2ch Sound Device
UPC - 027242806146
View all Sony DR-GA500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Step 1-: Connecting a 2ch Sound Device Connect the 2ch jacks of the processor by the supplied multi-channel cable. The EFFECT function provides 7.1ch extended surround output from a 2ch input source. 1 Connect the processor to the sound device as illustrated below. Connecting jacks of the sound device* Cable plug names MIC IN Connect to MIC IN jack MIC L/R OUT Connect to L/R OUT jack L/R Not connected SL / SR Not connected C / SW Not connected SBL / SBR * The jack name varies depending on the sound device. Rear panel of processor 2 Slide the INPUT switch to "2ch." Front panel of processor Multi-channel cable (supplied) 3 Set the 2ch speaker mode in the computer. For details on operation of your computer/sound device, refer to the operating instructions for it. Do not connect the USB cable with multi-channel cable at the same time when you connect the processor to the computer. The computer sound setting may be switched to an unintended device. 10GB Connection