Sony DR-GA500 Operating Instructions - Page 12
Step 2: Connecting the AC Adaptor, Step 3: Preparing the Headset - 7 1 headphones
UPC - 027242806146
View all Sony DR-GA500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Step 2: Connecting the AC Adaptor Connect the supplied AC adaptor to the processor, and then connect the AC adaptor to the AC outlet. Rear panel of processor To DC IN 5.2V jack AC adaptor (supplied) To AC outlet Step 3: Preparing the Headset 1 Connect the (microphone) plug of the headset to the HEADSET (MIC IN) jack of the processor, and connect the (headphone) plug to the HEADSET (PHONES) jack. Rear panel of processor Headset Black Red 2 Adjust the band of the headset, and wear the earpad marked on your right ear, and the one marked on your left ear. There is a tactile dot on the hanger marked to distinguish the left side. Adjust the position of the microphone for effective pickup of your voice. Return the position of the microphone to rest near the earpad when not in use. Note If the position of the microphone is not correct, the sensitivity of the microphone will decrease, and sound from the headphone may enter the microphone. 12GB Connection