Sony DR-GA500 Operating Instructions - Page 16
Listening to Sounds, Operation - drivers
UPC - 027242806146
View all Sony DR-GA500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Operation Listening to Sounds 1 Turn on the connected computer. 2 Press the / (on / standby) switch to turn the processor on. The power indicator of the processor lights white. If you connect the USB port on the computer to the USB port of the processor by the supplied USB cable, USB drivers will be installed automatically when the processor is turned on at the first time after connecting and starting the computer. 3 Put on the headset. (See page 12) 4 Start playback from the computer. To adjust the volume Adjust the volume level of the headset, and set the microphone muting mode. VOL (volume) Adjust the volume level of the headset. MIC MUTING ON: The microphone is set to the MIC MUTING ON mode. OFF: The microphone is set to the MIC MUTING OFF mode. Notes When watching films, be careful not to increase the volume too high in quiet scenes. You may hurt your ears when a loud scene is played. The headset volume and the output level of the computer are not synchronised. Also note that the microphone muting mode is not synchronised. The music/sound might not be output from the headset if you connect to the processor by the USB cable and slide the INPUT switch to "USB" while using music software. In this case, restart the music software. 16GB Operation