Sony DSC-T20/P Cyber-shot® Handbook - Page 97

Battery pack and power, Shooting still images/movies, Cannot charge the battery pack

Page 97 highlights

Troubleshooting Battery pack and power The battery pack cannot be installed. • Install the battery pack correctly using the tip of the battery pack to push the battery eject lever toward the bottom of the camera. Cannot turn on the camera. • After installing the battery pack into the camera, it may take a little while to get the camera powered. • Install the battery pack correctly. • The battery pack is discharged. Install charged battery pack. • The battery pack is dead (page 113). Replace it with a new one. • Use a recommended battery pack. The power turns off suddenly. • If you do not operate the camera for about three minutes while the power is on, the camera turns off automatically to prevent wearing down the battery pack. Turn on the camera again. • The battery pack is dead (page 113). Replace it with a new one. The battery remaining indicator is incorrect. • This phenomenon occurs when you use the camera in an extremely hot or cold location. • The displayed battery remaining differs from the current one. Fully discharge and then charge the battery pack to correct the display. • The battery pack is discharged. Install the charged battery pack. • The battery pack is dead (page 113). Replace it with a new one. Cannot charge the battery pack • You cannot charge the battery pack using the AC Adapter (not supplied). Shooting still images/movies Your camera cannot record images. • Check the free capacity of the internal memory or "Memory Stick Duo". If it is full, do one of the following: - Delete unnecessary images (page 26). - Change the "Memory Stick Duo". • You are using the "Memory Stick Duo" with the write-protect switch, and the switch is set to the LOCK position. Set the switch to the recording position (page 111). • You cannot record images while charging the flash. • Select a shooting mode other than [ Movie Mode] using the HOME screen when shooting still images. • Select [ Movie Mode] using the HOME screen when shooting movies. 97 Troubleshooting

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119

97
Troubleshooting
Troubleshooting
The battery pack cannot be installed.
Install the battery pack correctly using the tip of the battery pack to push the battery eject lever
toward the bottom of the camera.
Cannot turn on the camera.
After installing the battery pack into the camera, it may take a little while to get the camera
powered.
Install the battery pack correctly.
The battery pack is discharged. Install charged battery pack.
The battery pack is dead (page 113). Replace it with a new one.
Use a recommended battery pack.
The power turns off suddenly.
If you do not operate the camera for about three minutes while the power is on, the camera
turns off automatically to prevent wearing down the battery pack. Turn on the camera again.
The battery pack is dead (page 113). Replace it with a new one.
The battery remaining indicator is incorrect.
This phenomenon occurs when you use the camera in an extremely hot or cold location.
The displayed battery remaining differs from the current one. Fully discharge and then charge
the battery pack to correct the display.
The battery pack is discharged. Install the charged battery pack.
The battery pack is dead (page 113). Replace it with a new one.
Cannot charge the battery pack
You cannot charge the battery pack using the AC Adapter (not supplied).
Your camera cannot record images.
Check the free capacity of the internal memory or “Memory Stick Duo”. If it is full, do one of
the following:
Delete unnecessary images (page 26).
Change the “Memory Stick Duo”.
You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to
the LOCK position. Set the switch to the recording position (page 111).
You cannot record images while charging the flash.
Select a shooting mode other than [
Movie Mode] using the HOME screen when shooting
still images.
Select [
Movie Mode] using the HOME screen when shooting movies.
Battery pack and power
Shooting still images/movies