Sony DSC W5 Operating Instructions - Page 67
Creating a video CD using, ImageMixer VCD2, To start up ImageMixer VCD2
UPC - 027242671355
View all Sony DSC W5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
To disconnect the USB cable/ remove the "Memory Stick"/turn off the camera Drag and drop the drive icon or the icon of the "Memory Stick" to the "Trash" icon, then remove the USB cable, remove the "Memory Stick", or turn off the camera. • If you are using Mac OS X v10.0, perform the procedure above after you have turned your computer off. Creating a video CD using "ImageMixer VCD2" 6 After the user information screen appears, enter the desired name and password. The installation of the software starts. To start up "ImageMixer VCD2" Open [Image Mixer] in [Application], then double-click [ImageMixer VCD2]. For information on the use of the software Click [?] at the upper-right corner of each screen to show the on-line help. Technical support for "ImageMixer VCD2" is provided by the Pixela User Support Center. For more information, refer to the information included on the CD-ROM. Using your computer • You can create an image file that is compatible with the video CD creation function. To save the data in the video CD format on a CD-R, you need Toast (not supplied) by Roxio. To install "ImageMixer VCD2" • Shut down all other application software before you install "ImageMixer VCD2." • The display settings should be 1024 × 768 dots or higher and 32,000 colors or higher. 1 Turn on your Macintosh computer, and insert the CD-ROM (supplied) into the CD-ROM drive. 2 Double-click the CD-ROM icon. 3 Copy the [IMXINST.SIT] file in the [MAC] folder to the hard disk icon. 4 Double-click the [IMXINST.SIT] file in the copy-to folder. 5 Double-click the extracted [ImageMixer VCD2_Install] file. 67