Sony DVO1000MD User Manual (Instructions For Use) - Page 23
Setting the Date and Time, The DATE/TIME PRESET sub menu of the SETUP
View all Sony DVO1000MD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Overview The message "NOW SAVING...." appears and the unit starts to save the setting. When saving is completed, the message disappears. Then, "TV SYSTEM WAS CHANGED PLEASE POWER OFF." appears on the monitor display, and "POWER OFF!" appears on the front panel display. Note The TV system is not changed even if you push the SET button. Be sure to turn the power of the unit off and on as described in steps 11 and 12 to change the system. 11 Press the 1 (on/standby) switch on the front panel to set the unit to the standby mode. The message "Good Bye" appears on the front panel display. Then, the front panel display goes off, the power is turned off and the unit enters the standby mode. 12 Press the 1 (on/standby) switch again to turn the power on. Setting the Date and Time The DATE/TIME PRESET sub menu of the SETUP MENU allows you to set the date and time. 91 The TOP menu appears. 2 Select "SETUP MENU" by pressing the V or v button. "SETUP MENU" is highlighted. 3 Press the b button. The SETUP MENU appears. 3,5 6 4 2,7 1 Press the MENU button. 4 Select "DATE/TIME PRESET" from the SETUP MENU display. Each time you press the v or V button, the highlighted cursor moves down or up one by one. When the highlighted cursor reaches the last item pressing the v button, press the v button again. The next page of the SETUP MENU appears. 23 Setup Preparation