Sony DVO1000MD User Manual (Instructions For Use) - Page 28

Note If the power is not turned on and the front panel display does not light even if you press the 1 (on/ standby) switch, check whether the MAIN POWER switch on the rear panel is set to the ] (on) side. For detailed information on how to turn the power on or off, see "Turning the Power On/Off" on page 20. 2 Press the OPEN/CLOSE button. The disc tray opens. The message changes to "OPEN" on the front panel display. 3 Place the disc on the tray. Unloading a disc 1 Press the OPEN/CLOSE button with the power turned on. The disc tray opens. 2 Remove the disc. 3 If you do not wish to load another disc, press the OPEN/CLOSE button to close the disc tray. Recording With the recording/playback surface facing down 4 Press the OPEN/CLOSE button. Or push the disc tray lightly. The disc tray closes. The DISC IN display blinks and the message "Now loading..." appears on the front panel display. DISC IN display Go to the next step, after the message "Now loading..." disappears and the DISC IN display stops blinking. If you load discs which cannot be used with the unit The message "Not Supported!" appears. In such a case, unload the disc and insert a disc that can be used with the unit. 28 Handling Discs