Sony DVP-F25 Operating Instructions - Page 23

Hookups Step 3: Attaching the Jack Cover and Stand You can use the player laid flat, or in an upright position by attaching the supplied stand to the rear or side of the player. You can also install the player on the wall. Attaching the jack cover (Using the player laid flat) 1 Gather all the connecting cords together and let them pass through the center of the opening at the back of the player. • Do not apply downword force to the player with the disc window facing down. Doing so may cause scratches or damage to the player. • If you use commercially available cords, it is recommended that you use cords similar in size to the cords provided with the player. If the cords are too thick or stiff, or the plug is too large, you may not be able to attach the jack cover securely. If you cannot attach the jack cover, you do not have to attach the jack cover. Using the player in the upright position Make sure you attach the supplied stand. To stand the player on its rear 1 Attach the stand to the screw hole of the jack cover using the supplied screw. 2 Attach the jack cover carefully so as not to pinch the cords. 3 Place the player flat on a level surface. 2 Place the player upright on the stand. Notes • Make sure that the connecting cords are not trapped by the jack cover. c continued 23