Sony DVP-F25 Operating Instructions - Page 63
Setting the digital output signal, DOLBY DIGITAL DVD only, DTS DVD only
View all Sony DVP-F25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Setting the digital output signal Switches the method of outputting audio signals when you connect a component such as an amplifier (receiver) or MD deck with a digital input jack. For connection details, see page 18. Select "DOLBY DIGITAL" and "DTS" after setting "DIGITAL OUT" to "ON." AUDIO SETUP AUDIO ATT: OFF AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: D-PCM DTS: OFF Settings and Adjustments If you connect a component that does not conform to the selected audio signal, a loud noise (or no sound) will come out from the speakers, affecting your ears or causing the speakers to be damaged. ◆ DOLBY DIGITAL (DVD only) Selects the type of Dolby Digital signal. D-PCM Select this when the player is connected to an audio component lacking a built-in Dolby Digital decoder. You can select whether the signals conform to Dolby Surround (Pro Logic) or not by making adjustments to the "DOWNMIX" item in "AUDIO SETUP" (page 62). DOLBY DIGITAL Select this when the player is connected to an audio component with a built-in Dolby Digital decoder. ◆ DTS (DVD only) Selects whether or not to output DTS signal. OFF Select this when the player is connected to an audio component lacking a built-in DTS decoder. ON Select this when the player is connected to an audio component with a built-in DTS decoder. 63