Sony DVP-F25 Operating Instructions - Page 26

◆ If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode • 16:9 (page 60) 8 Press ENTER. The Setup Display for selecting the type of jack used to connect your amplifier (receiver) appears. Is this player connected to an amplifier (receiver) ? Select the type of jack you are using. YES AUDIO OUTPUT L/R DIGITAL OUTPUT NO 9 Press X/x to select the type of jack (if any) you are using to connect to an amplifier (receiver), then press ENTER. Choose the item that matches the audio connection you selected on pages 19 to 22 ( A through D ). A • If you connect just a TV and nothing else, select "NO." Quick Setup is finished and connections are complete. B-1 C-1 • Select "AUDIO OUTPUT L/R." Quick Setup is finished and connections are complete. B-2 C-2 D • Select "DIGITAL OUTPUT." The Setup Display for "DOLBY DIGITAL" appears. 10Press X/x to select the type of Dolby Digital signal you wish to send to your amplifier (receiver). Choose the signal that matches the audio connection you selected on pages 20 to 22 ( B through D ). AUDIO SETUP AUDIO ATT: OFF AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: D-PCM DTS: D-PCM DOLBY DIGITAL B-2 C-2 • D-PCM (page 63) D • DOLBY DIGITAL (only if the amplifier (receiver) has a Dolby Digital decoder) (page 63) 11Press ENTER. "DTS" is selected. AUDIO SETUP AUDIO ATT: OFF AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: D-PCM DTS: OFF OFF ON 12Press X/x to select whether or not you wish to send a DTS signal to your amplifier (receiver). Choose the item that matches the audio connection you selected on pages 20 to 22 ( B through D ). B-2 C-2 • OFF (page 63) D • ON (only if the amplifier (receiver) has a DTS decoder) (page 63) 13Press ENTER. Quick Setup is finished. All connections and setup operations are complete. 26