Sony DVP-F25 Operating Instructions - Page 62
Settings for the Sound (AUDIO SETUP), AUDIO ATT attenuation, AUDIO DRC Dynamic Range Control, DVD only
View all Sony DVP-F25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Settings for the Sound (AUDIO SETUP) "AUDIO SETUP" allows you to set the sound according to the playback and connection conditions. Select "AUDIO SETUP" in the Setup Display. To use the display, see "Using the Setup Display" (page 58). The default settings are underlined. AUDIO SETUP AUDIO ATT: OFF AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: D-PCM DTS: OFF ◆ AUDIO ATT (attenuation) If the playback sound is distorted, set this item to "ON." The player reduces the audio output level. This function affects the output of the AUDIO OUT L/R jacks. OFF Normally, select this position. ON Select this when the playback sound from the speakers is distorted. ◆ AUDIO DRC (Dynamic Range Control) (DVD only) Makes the sound clear when the volume is turned down when playing a DVD that conforms to "AUDIO DRC." This affects the output from the following jacks: - AUDIO OUT L/R jacks - DIGITAL OUT (OPTICAL) jack only when "DOLBY DIGITAL" is set to "D-PCM" (page 63). STANDARD Normally select this position. TV MODE Makes the low sounds clear even if you turn the volume down. WIDE RANGE Gives you the feeling of being at a live performance. ◆ DOWNMIX (DVD only) Switches the method for mixing down to 2 channels when you play a DVD which has rear sound elements (channels) or is recorded in Dolby Digital format. For details on the rear signal components, see "Checking the audio signal format" (page 45). This function affects the output of the following jacks: - AUDIO OUT L/R jacks - DIGITAL OUT (OPTICAL) jack when "DOLBY DIGITAL" is set to "D-PCM" (page 63). DOLBY SURROUND Select this when the player is connected to an audio component that conforms to Dolby Surround (Pro Logic). NORMAL Select this when the player is connected to an audio component that does not conform to Dolby Surround (Pro Logic). ◆ DIGITAL OUT Selects if audio signals are output via the DIGITAL OUT (OPTICAL) jack. ON Normally select this position. When you select "ON," see "Setting the digital output signal" for further settings. OFF The influence of the digital circuit upon the analog circuit is minimal. 62