Sony DVP-FX820 Operating Instructions - Page 16

• During operation, " " may appear on the screen. This symbol indicates that a function explained in this operating instruction is not available on the current DVD VIDEO. To stop playback Press x. Pressing H again will start playback from the point you stopped (Resume Play). See page 17 for details. To play from the beginning, press x twice, then press H. To turn off the power Press the remote's \/1 button or slide the player's \/1/HOLD switch to "\/1." To avoid accidental button operation on the player Set the player's \/1/HOLD switch to "HOLD." All the buttons on the player are locked, while the button on the remote remains operable. To play DTS sound tracks on a DVD VIDEO • The player's speaker does not output DTS sound. When you play DTS sound tracks on a DVD VIDEO, connect the player to an AV amplifier (receiver) (page 35) and set up "DTS" in "Audio Setup" (page 31). • If you connect the player to audio equipment such as an AV amplifier (receiver) without a DTS decoder, do not set "DTS" to "On" in "Audio Setup" (page 31). A loud noise may come out from the speakers, which may affect your ears or cause speaker damage. Notes • A screen saver image appears when you leave the player in pause or stop without operation for more than 15 minutes. The image disappears when you press H. See page 30 for details. • The player turns off, 15 minutes after starting the screen saver function (Auto Power Off). Additional playback operations 1 2 3 4 5 6 7 8 9 0 . > x X To Operation Stop Press x Pause Press X Go to the next chapter, Press > track, or scene in continuous play mode Go back to the Press . previous chapter, track, or scene in continuous play mode Briefly fast forward Press during the current scene* playback. * DVD VIDEOs only. The above functions may not be used for some scenes. 16