Sony DVP-FX820 Operating Instructions - Page 30

Note Depending on the DVD, "4:3 Letter Box" may be selected automatically instead of "4:3 Pan Scan" or vice versa. ◆ Angle Mark Displays the angle mark when you can change the viewing angles during playback of DVDs recorded with multi-angles. On Display the angle mark. Off Hide the angle mark. ◆ Screen Saver The screen saver image appears when you leave the player in pause or stop mode for 15 minutes. The screen saver will help prevent your display device from becoming damaged (ghosting). Press H to turn off the screen saver. On Activates the screen saver function. Off Deactivates the screen saver function. ◆ Default Each function returns to its original factory settings. Note that all of your settings will be lost. Settings for the Sound (Audio Setup) "Audio Setup" allows you to set the sound according to the playback and connection conditions. Select "Audio Setup" in the Setup Display. To use the display, see "Using the Setup Display" (page 28). The default settings are underlined. Audio Setup Audio DRC Digital Output TV Mode Off Select: ENTER Cancel: RETURN ◆ Audio DRC (Dynamic Range Control) (DVD only) Makes the sound clear when the volume is turned down when playing a DVD that conforms to "Audio DRC." This function affects the output from the following jacks: - AUDIO jack - OPTICAL OUT jack only when "Dolby Digital" is set to "Downmix PCM" (page 31). Standard Normally, select this position. TV Mode Makes low sounds clear even if you turn the volume down. Wide Range Gives you the feeling of being at a live performance. ◆ Digital Output Selects if audio signals are output via the OPTICAL OUT jack. On Normally select this position. When you select "On," see "Setting the digital output signal" for further settings. Off The influence of the digital circuit upon the analog circuit is minimal. 30