Sony DVP-NS400D Operating Instructions - Page 63

To turn off the Sound Feedback function When there is no disc in the player, press and hold X on the player for more than two seconds. You will hear two beeps and the Sound Feedback function is turned off. Controlling Your TV or AV Amplifier (Receiver) with the Supplied Remote By adjusting the remote signal, you can control your TV or AV amplifier (receiver) with the supplied remote. If you connect the player with a AV amplifier (receiver), you can control the volume with the supplied remote. Notes • Depending on the units being connected, you may not be able to control your TV or AV amplifier (receiver) using some of the buttons below. • If you enter a new code number, the code number previously entered will be erased. • When you replace the batteries of the remote, the code number may be reset to the default setting. Reset the appropriate code number. Controlling TVs with the remote TV [/1 Number buttons 123 456 789 0 TV/VIDEO VOL Hold down TV [/1, and enter your TV's manufacturer's code (see the table) using the number buttons. Then release TV [/1. Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. Using Various Additional Functions continued 63