Sony DVP-NS400D Operating Instructions - Page 72
Settings for the Speakers (SPEAKER SETUP), SPEAKER SETUP
UPC - 027242586543
View all Sony DVP-NS400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
x48kHz/96kHz PCM (DVD only) Selects the sampling frequency of the audio signal to be output via the DIGITAL OUT (OPTICAL or COAXIAL) jacks. 48kHz/16bit The audio signals of DVDs are always converted to 48kHz/16 bit. 96kHz/24bit All types of signals including 96kHz/24bit are output in their original format. However, if the signal is encrypted for copyright protection purposes, the signal is only output as 48 kHz/16 bit. If a receiver (amplifier) which cannot accept 96Hz is connected to the player, do not set this. Otherwise, a loud noise may come out from the speakers. Notes • Even if you set "48kHz/96kHz PCM" in "AUDIO SETUP" to "96kHz/24bit," the sampling frequency is converted to 48kHz/16bit when a SURROUND mode (page 50) is selected. • The analog audio signals from the LINE OUT L/R (AUDIO) 1/2 jacks are not affected by this setting and keep their original sampling frequency level. 72 Settings for the Speakers (SPEAKER SETUP) To obtain the best possible surround sound, set the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the volume and the balance of the speakers to the same level. This setting is effective when connecting the speaker with 5.1CH OUTPUT jacks (page 21). Select "SPEAKER SETUP" in the Setup Display. For details, see "Using the Setup Display" (page 65). The default settings are underlined. SPEAKER SETUP SIZE: DISTANCE: BALANCE: LEVEL: TEST TONE: OFF FRONT: CENTER: REAR: SUBWOOFER: LARGE LARGE LARGE(REAR) YES To return to the default setting Select the item, then press CLEAR. xSIZE Selects the size of the speakers to be connected. • FRONT LARGE Normally select this position. SMALL When the sound cracks or the surround sound effects are difficult to hear, select this. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the front speaker from the subwoofer. • CENTER NONE If you do not connect a center speaker, select this. LARGE Normally select this position.