Sony DVP-NS400D Operating Instructions - Page 73
Rear speaker position REAR/SIDE, Be sure to change the value in the Setup
UPC - 027242586543
View all Sony DVP-NS400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
SMALL When the sound cracks or the surround sound effects are difficult to hear, select this. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the center speaker from other speakers. • REAR NONE If you do not connect rear speakers, select this. LARGE (REAR/SIDE): Normally select this position. Select either of these according to the rear speaker's position*. SMALL (REAR/SIDE): When the sound cracks or the surround sound effects are difficult to hear, select this. Select either of these according to the rear speaker's position*. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the rear speaker from other speakers. * Rear speaker position (REAR/SIDE) Correctly specify the location of the rear speakers to enjoy the SURROUND effect. •Set to the "SIDE," if the location of the rear speakers corresponds to section A below. •Set to the "REAR," if the location of the rear speakers corresponds to section B below. This setting affects only "VIRTUAL REAR SHIFT," "VIRTUAL MULTI REAR," and "VIRTUAL MULTI DIMENSION" mode (page 51). • SUBWOOFER NONE YES If you do not connect a subwoofer, select this. This activates the Dolby Digital bass redirection circuitry and outputs the LFE signals from the front speakers as long as the front speaker size is set to "LARGE." If you connect a subwoofer, select this to output the LFE (low frequency effect) channel from the subwoofer. When you set the other speakers settings to "SMALL," the subwoofer makes up for the missing bass frequencies of the speakers. Notes • The cut off frequency for the subwoofer is fixed at 120 Hz. • If your speakers are too small to reproduce low bass frequencies, please set all speaker settings to "SMALL" and utilize a subwoofer for low frequency sound. • Even if there are fewer than 6 speakers connected, the player distributes the audio signal components to the front speakers. xDISTANCE The default distance setting for the speakers in relation to the listening position is shown below. 12ft/3.6m 12ft/3.6m 12ft/3.6m Settings and Adjustments 10ft/3.0m 10ft/3.0m 90 45 Be sure to change the value in the Setup Display when you move the speakers. The 20 default adjustments are in parentheses. continued 73