Sony EVID70/W Product Brochure (rmbr300) - Page 24

Overview F AUTO/MANUAL button and AUTO indicator Press this button to select focus mode AUTO or MANUAL. When AUTO is selected, the AUTO indicator lights and the camera focuses automatically on the subject in the center of the screen. The FOCUS control and the ONE PUSH AF button are disabled. When MANUAL is selected, the FOCUS control and the ONE PUSH AF button are enabled (with the FOCUS indicator lit). G ONE PUSH AF button This button is enabled when MANUAL is selected with the AUTO/MANUAL button. Press the button to perform the one-push auto focus function (except the EVI-D30/D30P). H RESET button Hold down this button and press POSITION button 1 to 16, and the memory of the camera corresponding to the pressed POSITION button is cleared to the factory-preset conditions. When multiple cameras are connected, the camera addresses are set by holding down this button and pressing the POWER button. I PRESET button Hold down this button and press POSITION button 1 to 16, and the current camera settings are stored in the memory of the camera corresponding to the pressed POSITION button. J PANEL LIGHT button Press this button to illuminate all the POSITION buttons and CAMERA buttons. Press the button again to turn off the illumination. K BACK LIGHT button When the FULL AUTO exposure mode is selected on the camera, press this button to enable the backlight compensation function of the camera. Press it again to disable the function. L PAN-TILT RESET button Press this button to reset the pan/tilt position of the camera to the initial conditions. M ONE PUSH AWB button When the ONE PUSH white balance mode is selected on the camera, press this button to perform the one-push white balance adjustment. N MENU button For the BRC-300/300P camera, press this button to display the menu of the camera, return to the main menu or turn off the menu. For other cameras, press this button to turn the onscreen data display on or off. O Joystick The joystick is used for pan/tilt and zoom operations. Select the camera you want to control using the CAMERA buttons and operate the joystick. Panning and tilting When you incline the joystick right and left, the camera pans. When you incline it forward or backward, the camera tilts. The pan/tilt speed changes according to the angle of the inclination. When you release the joystick, the camera movement stops. Zooming When you turn the dial on the upper part of the joystick clockwise, the subject becomes larger (zoom in). When you turn it counterclockwise, the subject becomes smaller (zoom out). To face the camera back to the front When you press the button on the top of the joystick for one or two seconds with or without the menu displayed, the pan/tilt/zoom are reset and the camera returns to the front. P SHIFT button and indicators Press this button for more than one second to select the function of the POSITION buttons for positions 1 to 8 or positions 9 to 16. The upper indicator lights for positions 1 to 8, and the lower indicator for positions 9 to 16. Q L/R DIRECTION button The camera is preset to face toward the right whenever the joystick is inclined to the right. Hold down this button and press POSITION button 2 (REV) to reverse the pan direction to the direction in which you incline the joystick. To reset the direction, hold down this button and press POSITION button 1 (STD). 6 GB Location and Function of Parts