Sony FCBEH3300 Product Manual (Tehnical Manual for new HD Block Cameras) - Page 13

Basic Functions When Auto Slow Shutter is OFF (initial setting) AGC IRIS ICR MAX OPEN Shutter 1/60 sec ICR ON GAIN IRIS SHUTTER Dark ICR OFF U ON Bright When Auto Slow Shutter is ON ICR ON (Iris Open) (Gain Max) AGC MAX IRIS OPEN ICR ON GAIN IRIS (Slow Shutter Max) Adjustable SHUTTER (Iris Min) (0dB) (1/60 sec) Dark ICR ON U OFF Adjustable Bright Note When in Auto_ICR_OFF state and WB data is added (default), a malfunction may occur when the subjects largely consisting of blue and green colors are taken. Camera ID The ID can be set up to 65,536 (0000 to FFFF). As this will be memorized in the nonvolatile memory inside, data will be saved regardless of whether it has been backed up. Effect It consists of the following functions. • Neg. Art: Negative/Positive Reversal • Black White: Monochrome Image Others E-FLIP This function turns the video output from the camera upside down. Mirror Image This function reverses the video output from the camera horizontally. Freeze This function captures an image in the field memory of the camera so that this image can be output continuously. Because communication inside the camera is based on V cycle, the captured image is always the one 3V to 4Vs after the sending of a Command. Thus, you can not specify a time period after sending EVEN, ODD or a Command. Memory (Position preset) Using the position preset function, 6 sets of camera shooting conditions can be stored and recalled. This function allows you to achieve the desired status instantly, even without adjusting the following items each time. • Zoom Position • Digital Zoom On/Off • Focus Auto/Manual • Focus Position • AE Mode • Shutter control parameters • Bright Control • Iris control parameters • Gain control parameters • Exposure Compensation On/Off • Exposure Level • Backlight Compensation On/Off • Slow Shutter Auto/Manual • Slow AE Response speed • White Balance Mode • R/B Gain • Aperture • ICR Shoot On/Off • WD On/Off Custom Preset As with the position preset function, the camera shooting conditions can be stored and recalled. The settings are recalled when the power is turned on. For setting items, see the "Initial Settings, Custom Preset and Backup" section on page 22. User Memory Area A user area of 16 bytes allows you to write data, such as an ID for each customer, data for each system, and so on, freely. Note Rewriting of memory is not unlimited. Be careful to avoid using the memory area for such as unnecessary tasks as rewriting the contents of the memory for every operation. 13