Sony FD97 Operating Instructions (primary manual) - Page 10
Charging the battery pack, Battery remaining indicator
![]() |
UPC - 027242587618
View all Sony FD97 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Charging the battery pack When the camera is turned on, you cannot charge the battery pack. Be sure to turn off the power of the camera. 1 Battery pack to DC IN jack 2 AC-L10A/L10B/L10C AC power adaptor Power cord (mains lead) 3 to a wall outlet (mains) 1 Insert the battery pack into your camera. 2 Open the DC IN cover and connect the AC power adaptor to the DC IN jack of your camera with the v mark facing up. 3 Connect the power cord (mains lead) to the AC power adaptor and then to a wall outlet (mains). The POWER ON/OFF (CHG) lamp (orange) below the LCD screen lights up when charging begins. When the POWER ON/OFF (CHG) lamp goes off, full charge is completed. After charging the battery pack Disconnect the AC power adaptor from the DC IN jack on your camera. Battery remaining indicator The LCD screen or finder on the camera shows the remaining time for which you can still record or play back images. This indication may not be entirely accurate depending on the conditions of use and the operating environment. Charging at a room temperature of 10°C to 30°C (50°F to 86°F) is recommended. 10
![](/manual_guide/products/sony-mvcfd97-operating-instructions-primary-manual-4d825e5/10.png)