Sony FWD-32LX2F Operating Instructions - Page 50
Optional Adaptors, COMPONENT/RGB INPUT Adaptor BKM - manual
UPC - 027242705357
View all Sony FWD-32LX2F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Optional Adaptors The connectors marked with 5 and 7 on the side panel are slot-in types and can be fitted with any of the following optional adaptors (not supplied). For details on installation, consult your Sony dealers. VIDEO INPUT Adaptor BKM-FW10 This is the same as the optional adaptor preinstalled in the 7 OPTION 2 slot. See page 8. COMPONENT/RGB INPUT Adaptor BKMFW11 RGB/COMPONENT ACTIVE THROUGH Adaptor BKM-FW12 1 2 3 OUT IN RGB/COMPONENT ACTIVE THROUGH IN AUDIO Y/G COMPONENT/RGB INPUT ADAPTOR 1 2 3 1 Y/G PB/CB/B PR/CR/R IN (BNC): Connects to the analog RGB signal or component signal output of a piece of video equipment or PC. 2 HD VD IN (BNC): Connects to the synchronization signal output of a PC. Note When inputting a component signal, be sure not to input sync signals to the HD and VD connectors. If you do so, the picture may not be displayed properly. 3 AUDIO (Stereo mini jack): Inputs an audio signal. Connects to the audio output of a piece of video equipment or PC. 10 GB AUDIO VD HD PR/CR/R PB/CB/B 1 RGB/COMPONENT IN (D-sub 15-pin): Connects to the component signal output or analog RGB signal output of a piece of video equipment or PC. For details on inputting a component signal to the connector, see "Pin assignment" on page 35. Note When inputting a component signal, be sure not to input sync signals to pins 13 and 14. If you do so, the picture may not be displayed properly. 2 RGB/COMPONENT OUT (D-sub 15-pin): Connects to the component signal input or analog RGB signal input of a piece of video equipment or PC. 3 AUDIO IN (Stereo mini jack): Inputs an audio signal. Connects to the audio signal output of a piece of video equipment or PC. Note When the display is not connected to an AC power or is in the standby mode, no signal is output from the RGB/ COMPONENT OUT. NETWORK MANAGEMENT Adaptor BKM-FW32 For details, see the instruction manual of the BKMFW32. STREAMING RECEIVER Adaptor BKM-FW50 For details, see the instruction manual of the BKMFW50. Note When using a network cable for the BKM-FW32/50, be sure to use a shielded cable to help prevent the radiation of undesired radio waves. For details on the connection, see each instruction manual. For details on the optional adaptors for system expansion, BKM-FW series, see each instruction manual.