Sony FWD-32LX2F Operating Instructions - Page 70
Advanced Setup, Information, All Reset, SECAM, NTSC4.43, PAL-M, or select Auto to set - model
UPC - 027242705357
View all Sony FWD-32LX2F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Advanced Setup Information All Reset "Color System": Select the color system of video signals from "NTSC", "PAL", "SECAM", "NTSC4.43", "PAL-M", "PAL-N", "PAL60", or select "Auto" to set the color system automatically. "Status Display": "On" makes input signal and "Wide Mode" information appear on the screen for about 20 seconds when the display is turned on, and the input signal information appear for about 5 seconds when the input signal is switched, while "Off" disables display of status information. Tip You can display the input signal and "Wide Mode" information by using DISPLAY on the remote control regardless of the "Status Display" setting. "Illumination": "On" enables the Sony logo on the front of the display to light up, and "Off" disables the function. "Control Setting": This menu is used for settings of operation of the display and the remote control. "Remote Index": You can change the "Index Number" of the display if necessary. Select to set the "Index Number" of the display with F/f and press to confirm the setting. Note When you set the "Index Number", use the buttons on the display. The "Index Number" cannot be set with the remote control. "Control Mode" "Display+Remote": You can operate the display with the control buttons on the display and the remote control. "Display Only": Disables the remote control function. You can make settings for the display only using the control buttons on the display. "Remote Only": Disables the controls on the display. You can make settings for the display only using the remote control. "All Off": Disables the operation of both the remote control and the control buttons on the display. You can operate the display via the REMOTE connector on the display (BKM-FW20) and via the optional adaptor with communication functions (such as BKM-FW32/FW50). Notes • When operating this item, the modes you can select differ depending on the button you are using. When setting this item with on the remote control, you can select only "Display+Remote" or "Remote Only". When setting this item with on the display, you can select only "Display+Remote" or "Display Only". • When this option is set to "All Off", you cannot operate the display using the remote control and the control buttons on the display. You can return the setting to "Display+Remote" by pressing MENU and + on the display at the same time for more than 5 seconds. Displays the "Model Name", "Serial Number", "Operation Time", "Software Version" and "IP Address" of your display. Note The "IP Address" is not shown if the optional adaptor with network functions is not installed. Resets all the "Setup" settings to the default settings. Note The items included in the "Information" option and the "Index Number" will not be reset. 30 GB