Sony FWD-32LX2F Operating Instructions - Page 56
Using the ID MODE button, To correct the Index Number, To cancel the ECO Mode - b specifications
UPC - 027242705357
View all Sony FWD-32LX2F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Using the ID MODE button You can operate a specific display without affecting other displays installed at the same time. 1 Press ON button. Display's "Index Number" appears in black characters on the lower left menu on the screen. (Every display is allocated an individual preset "Index Number" from 1 to 255.) Index Number 4 When all of the setting changes have been completed, press OFF button. The display returns to the normal screen. To correct the Index Number Press the C button to clear the current input "Index Number". Return to Step 2, and input a new "Index Number". Index Number : 117 2 Input the "Index Number" of the display you want to operate using the 0 - 9 buttons on the remote control. The input number appears right next to the "Index Number" of each display. Input Number Index Number : 117 117 3 Press SET button. The characters on the selected display change to green while the others change to red. Tip To change the "Index Number" of the display, see "Remote Index" in "Control Setting" on page 30. Using the ECO Mode function You can reduce the power consumption of the display. ECO ECO Mode: Off ECO Mode: Low ECO Mode: High ECO Mode: Picture Off To cancel the ECO Mode Press ECO button repeatedly until "ECO Mode : Off" appears. Tips • If you turn off the display when the "ECO Mode" is activated, the mode stays on next time you turn on the display except "Picture Off". • You can set the "ECO Mode" using the "Setup" settings. Select "ECO Mode" in the "Setup" settings, then set it to "Off", "Low", "High", or "Picture Off". You can operate the specified display indicated with green characters only. Only the operation of POWER ON switch and STANDBY/ID MODE-OFF button is effective to other displays, as well. 16 GB