Sony HCD-C450 Operating Instructions - Page 53
Using only the front, speakers, Adjusting the level, parameters, Press AMP MENU repeatedly
View all Sony HCD-C450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Sound Adjustments Using only the front speakers (2CH STEREO) Adjusting the level parameters 1 23 4 56 7 89 >10 10/0 SOUND FIELD Press SOUND FIELD repeatedly until "2CH STEREO" appears on the front panel display. This mode outputs the sound from the front left and right speakers only. Standard 2 channel (stereo) sources completely bypass the sound field processing. Multi channel surround formats are downmixed to 2 channel. Note No sound is output from the sub woofer when 2 CH STEREO is selected. To listen to 2 channel (stereo) sources using the front left and right speakers and a sub woofer, press SOUND FIELD repeatedly to select A.F.D.. The level menu contains parameters that let you adjust the balance and speaker volumes of each speaker (page 28). X/x/C/c AMP MENU 1 Start playing a program source encoded with multichannel surround sound. 2 Press AMP MENU repeatedly on the remote. 9 LEVEL appears on the front panel display. 3 Sit in your listening position and select the item to be adjusted using X/x. 4 Adjust the volume level using C/c. The adjusted value will appear on the front panel display. If you do not operate the remote for a few seconds, the value turns off and is stored in the system. 53GB